Das Architectural Institute of Japan (AIJ) ha una revisione del benchmark Benchmark-Szenarien für Windsimulation vorgestellt. Der Nachfolgende Beitrag dreht sich dabei um den "Caso A - grattacielo con forma 2:1:1". Im Folgenden wird das beschriebene Szenario in RWIND2 nachgebildet und die Ergebnisse mit den simulierten und der experimentellen Resultate des AIJ verglichen.
L'esempio di verifica descrive i carichi di pressione sulle pareti di edifici in disposizione in tandem situati a livello del suolo. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
L'esempio di verifica descrive il flusso in stato stazionario attorno a un grattacielo in blocchi urbani (modello in scala). The example is given by the Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
L'esempio di verifica descrive il flusso in stato stazionario attorno a un edificio isolato (modello in scala).L'esempio è fornito dall'Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
Una membrana è tesa mediante precompressione isotropa tra due raggi di due cilindri concentrici che non giacciono in un piano parallelo all'asse verticale. Find the final minimum shape of the membrane - the helicoid - and determine the surface area of the resulting membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Considera una trave ASTM A992 W 18×50 per campata e carichi permanenti e permanenti uniformi come mostrato nella Figura 1. The member is limited to a maximum nominal depth of 18 inches. The live load deflection is limited to L/360. The beam is simply supported and continuously braced. Verify the available flexural strength of the selected beam, based on LRFD and ASD.
La Figura 1 mostra una trave ASTM A992 W 24×62 con taglio alle estremità di 48.000 e 145.000 kip rispettivamente dai carichi permanenti e variabili. Verify the available shear strength of the selected beam, based on LRFD and ASD.
Una colonna è composta da una sezione in calcestruzzo (rettangolo 100/200) e una sezione in acciaio (profilo I 200). It is subjected to pressure force. Determine the critical load and corresponding load factor. The theoretical solution is based on the buckling of a simple beam. In this case, two regions have to be taken into account due to different moments of inertia and material properties.
Una trave a quarto di cerchio con una sezione trasversale rettangolare è caricata per mezzo di una forza fuori dal piano. This force causes a bending moment, torsional moment, and transverse force. While neglecting self-weight, determine the total deflection of the curved beam.
Una trave curva è costituita da due travi a sezione rettangolare. The horizontal beam is loaded by distributed loading. While neglecting self-weight, determine the maximum stress on the top surface of the horizontal beam.
Una struttura di copertura a guscio sotto carico di pressione è modellata dove i bordi diritti sono liberi, mentre sui bordi curvi le traslazioni y e z sono vincolate. Neglecting self‑weight, compute the maximum (absolute) vertical deflection, and compare the results with COMSOL Multiphysics 4.3.
Una trave incernierata con una sezione trasversale rettangolare è soggetta a carico distribuito e spostata verticalmente per eccentricità. Considering the small deformation theory, neglecting the self‑weight, and assuming that the beam is made of isotropic elastic material, determine the maximum deflection.
Una forza concentrata viene applicata improvvisamente a metà campata di una trave semplicemente supportata in un dato momento. Considering only the small deformation theory, determine the maximum deflection of the beam.
Una forza concentrata viene applicata per un breve periodo di tempo a metà campata di una trave semplicemente vincolata. Considering only the small deformation theory and assuming that the mass of the beam is concentrated at its mid‑span, determine its maximum deflection.
Una struttura intelaiata a due piani a campata singola è soggetta a carichi sismici. The modulus of elasticity and cross‑section of the frame beams are much larger than those of the columns, so the beams can be considered rigid. The elastic response spectrum is given by the standard SIA 261/1:2003. Neglecting self-weight and assuming the lumped masses are at the floor levels, determine the natural frequencies of the structure. For each frequency obtained, specify the standardized displacements of the floors as well as equivalent forces generated using the elastic response spectrum according to the standard SIA 261/1.2003.
Uno sbalzo è caricato di un momento alla sua estremità libera. Using the geometrically linear analysis and large deformation analysis, and neglecting the beam's self-weight, determine the maximum deflections at the free end. The verification example is based on the example introduced by Gensichen and Lumpe.
Un'asta con le condizioni al contorno date è caricata dal momento torcente e dalla forza assiale. Neglecting its self-weight, determine the beam's maximum torsional deformation as well as its inner torsional moment, defined as the sum of a primary torsional moment and torsional moment caused by the normal force. Provide a comparison of those values while assuming or neglecting the influence of the normal force. The verification example is based on the example introduced by Gensichen and Lumpe.
Una trave di legno rinforzata da due piastre di acciaio alle estremità è caricata da pressione. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.
Determina il momento flettente che, agendo all'estremità libera dello sbalzo, piegherà l'asta in una forma circolare. Neglecting the beam's self-weight, assuming the large deformation analysis, and loading the cantilever with the moment, determine its maximum deflections.
Una trave è completamente fissa (l'ingobbamento è limitato) all'estremità sinistra e supportata da un vincolo esterno a forcella (l'ingobbamento è abilitato) all'estremità destra. The beam is subjected to a torque, longitudinal force, and transverse force. Determine the behavior of the primary torsional moment, secondary torsional moment, and warping moment. The verification example is based on the example introduced by Gensichen and Lumpe.
Una trave vincolata ad entrambe le estremità è caricata con forza concentrata nel mezzo. Neglecting its self-weight and shear stiffness, determine the beam's maximum deflection, normal force, and moment at the mid-span, assuming the second- and third-order analysis.
Si consideri un tubo rigido del ponteggio, fissato nella parte inferiore utilizzando il vincolo esterno del ponteggio e caricato sia da un momento che da una forza. Self-weight is not considered. Considering an infinitely rigid beam, determine the maximum radial deflection.
A cantilever beam with an I-beam cross-section of length L is defined. The beam has five mass points with masses m acting in the X-direction. Il peso proprio è trascurato. The frequencies, mode shapes, and equivalent loads of this 5-DOF system are analytically calculated and compared with the results from RSTAB and RFEM.
Una trave in acciaio caricata assialmente con una sezione trasversale quadrata è bloccata a un'estremità e supportata da una molla all'altra. Two cases with different spring stiffnesses are considered. The verification example solves the calculation of the load factors of the beam in the image using the linear stability analysis.
Una trave di legno rinforzata da due piastre di acciaio alle estremità è caricata da pressione. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.